Franchises Available Find out more

1300 2 TURBO

Gripset P39 15 litre pail – Grey

Building Supplies>Waterproofing Membrane UV Stable>Gripset P39 15 litre pail – Grey
gripset_p39_uv_stable_waterproofing_membrane_15l_pail_gws-131gripset_p39_uv_stable_waterproofing_membrane_15l_pail_gws-131

Gripset P39 15 litre pail – Grey

SKU: GWS-131

$162.72 $178.99 incl. GST

Out of stock

Gripset P39 is a highly versatile, fibre enhanced membrane suitable for a wide range of under tile and exposed membrane applications.

Developed using advanced hybrid polyurethane technology, Gripset P39 offers superior elastomeric and flexible properties while maintaining high tensile strength. With outstanding waterproofing properties and low water vapour transmission, P39 possesses the unique feature for withstanding early water ponding and permanently wet conditions without re-emulsification.

Compliant to AS 4858: 2004 for internal wet areas, outstanding bonding properties are achieved for overlaid finishes such as renders, screeds, and tile adhesives.

With excellent UV resistance and anti-fungal properties, P39 can be used to protect exterior substrates for long term protection against UV degradation and harsh climatic conditions.

Data Sheet Safety Data Sheet

Gripset P39 Features & Benefits

  • Highly flexible and elastomeric
  • Low vapour transmission properties and low water absorption
  • Excellent adhesion properties
  • Outstanding weather resistant properties
  • Excellent early ponding water resistance
  • Once cured will not re-emulsify, handles permanently wet
  • conditions
  • Resistant to fungi and algae
  • Low dirt retention
  • Light foot trafficable
  • Solvent free, non-hazardous

Uses

  • Roofs as an exposed membrane finish
  • Parapets
  • External surfaces exposed to constant weather
  • Roofs to be covered over with screeds and toppings
  • Internal wet areas, bathrooms, laundries and tiled areas
  • Balconies, decks, podiums, terrace floors
  • General tiled areas to prevent moisture ingress

Substrates

  • Concrete, render and masonry
  • Fibre cement sheeting, plasterboard and structural sheeting
  • Wet area timber sheeting and external grade plywood
  • Aerated concrete panels and blocks

COVERAGE

Product is to be applied in a minimum of 2 coats to achieve a minimum dried film thickness of 1-1.2mm. For optimal sealing over flat roofs, product is to be applied in 3 coats to achieve a minimum dried film thickness of 1.3mm. Apply subsequent coats at different directions to the previous coat. Coverage is dependent upon surface condition and will vary accordingly as uneven and porous surfaces will require greater coverage to achieve the specified film thickness. Product can be applied by medium nap roller or brush.
1 x 15litre pail will cover 10m² @ 1mm DFT (2 coats)
1 x 15litre pail will cover 7.5m² @ 1.3mm DFT (3 coats)

Related products