Building Supplies

Bostik V70 Architectural Grade Silicone

Product Information

Bostik V70 is a high performance architectural grade structural glazing silicone. One-component, non-flowing, neutral cure, high modulus sealant. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant.

• Bostik V70 silicone sealant meets the currently accepted engineering standards for structural glazing
• This high strength silicone sealant has very good unprimed adhesion properties, to a broad range of building substrates.* (Substrate testing must always be carried out first)
• These features make this product a very good reliable structural adhesive sealant for both the Construction and Industrial industries
• The thixotropic nature of this product ensures that it will not slump in typical construction joints
• Excellent UV stability
• Long-life reliability
• Maintains its elastomeric structural joint sealant properties permanently, even under harsh conditions and temperature extremes

Your Smart Advantages

• Bostik V70 silicone sealant meets the currently accepted engineering standards for structural glazing.
• This high strength silicone sealant has very good unprimed adhesion properties, to a broad range of building substrates. *(Substrate testing must always be carried out first).
• These features make this product a very good reliable structural adhesive sealant for both the Construction and industrial industries.
• The thixotropic nature of this product ensures that it will not slump in typical construction joints.
• Excellent U.V Stability
• Long Life Reliability
• Bostik V70 has excellent natural ageing stability. It will maintain its elastomeric structural joint sealant properties permanently, even under harsh conditions and temperature extremes.

Recommended Uses

• Structually glazed curtain wall systems
• Two and four sided structual glazing
• Fin glazing
• Non-structural glazing applications
• Building weather seal
• Toughened glass assemblies
• Automotive glazing
• Adhering of composite panels
• Stiffener for metal panels application

Specifications

• Colour: Black
• Tack Free Time: 50 Minutes
• Skin Time: 8 Minutes
• Tooling Time: 10 Minutes
• Sag or slump: Nil
• Coverage Approximately 15 lineal metres for a 5mm bead
• Shore “A” hardness 31
• 100% Modulus: 0.7 MPa
• Tensile Strength: 1.2 MPa
• Elongation: 460%
• Dynamic Movement Capacity: ±35%
• Peel Strength after UV through Glass: 89N/25mm
• Accelerated Aging and Weathering (ASTM C792): Excellent
• Application temperature*: -10°C to 40°C
• Service temperature: -50°C to 200°C

Bostik V60 Architectural Grade Silicone

Product Information

Bostik V60 is a high performance architectural grade glazing silicone. One component, non-flowing, neutral cure, high modulus sealant. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant.

• Superior adhesion to painted and anodized aluminum & glass
• Thixotropic nature of this product ensures that it will not slump in typical construction joints
• Excellent UV stability
• Long Life reliability
• Bostik V60 has excellent natural ageing stability. It will maintain its elastomeric joint sealant properties permanently, even under harsh conditions and temperature extremes.

Your Smart Advantages

• Bostik V60 is a premium grade neutral cure glazing weatherproofing silicone sealant
• Its superior adhesion to painted and anodized aluminum & glass has made this silicone the market leader in the glass market for the last 25 years
• The thixotropic nature of this product ensures that it will not slump in typical construction joints
• Excellent U.V. Stability
• Long Life Reliability
• Bostik V60 has excellent natural ageing stability. It will maintain its elastomeric joint sealant properties permanently, even under harsh conditions and temperature extremes.

Recommended Uses

• Two sided structural glazing. (Colours only on to aluminum substrate)
• Structurally glazed systems. (Subject to Bostik approval and review of design first).
• Fin Glazing. (all V60 colours including trans).
• Sealing of Laminated and reflective glass
• General glazing applications
• Sealing of mirrors and splash backs (not vinyl backed)
• Toughened Glass Assemblies
• Weather Sealing in curtain walls and building facades
• Weather Sealing of composite metal panels
• Drinking Water – tank manufacturing

Specifications

• Colour: Translucent, White, Grey, Black, Silver & Matt Black
• Tack Free Time: 30 Minutes
• Skin Time: 8 Minutes
• Tooling Time: 8 Minutes
• Slag or Slump: Nil
• Coverage: Approximately 16 lineal metres per 300ml cartridge based on an average joint size of 6mm depth and 3mm width
• Shore “A” hardness: 22
• 100% Modulus: 0.5 MPa
• Tensile Strength: 1.5 MPa
• Elongation: 500%
• Peel Strength after UV through Glass: 89N/25mm
• Dynamic Movement Capacity: ±35%
• Accelerated Aging and Weathering (ASTM C792): Excellent

Bostik 5CLM® Silicone

Product Information

Bostik 5CLM^® is a high performance architectural grade, low modulus, high joint movement silicone. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant.

Where to Use

• Interior applications
• Exterior applications
• Commercial applications
• Industrial applications

Substrates

• Façades
• Composite panels
• Curtainwall joints
• Expansion joints
• Control joints
• Precast panels
• Concrete panels
• Composite panels
• Polycarbonate sheeting
• Splashbacks
• Plaques

Materials

• Metal
• Aluminium
• Anodized aluminium
• Marble*
• Granite*
• Concrete
• Copper
• Brass

Specifications

Bostik V4 Silicone

Product Information

Bostik V2 is an acetic cure, high modulus silicone sealant suitable for general glazing and some specialty glazing purposes. It cures by absorption of atmospheric moisture to for a flexible and durable elastomeric seal.

Recommended Uses

• Frameless shower screens
• Fin and butt glazing
• General glazing applications
• Toughened glass assemblies
• Aquariums
• Fiberglass applications

Suitable Materials

• Fibreglass
• Aluminium
• Stainless steel

Specifications

• Tack Free Time 2-3 Hours
• Skin Time 8-15 Minutes
• Tooling Time 15 Minutes
• Slag or Slump NIl
• Shore A Hardness 17 – 21
• 100% Modulus 0.25 MPa
• Tensile Strength 0.80 MPa
• Elongation 600%
• Peel Strength after UV through glass 67N/25mm
• Dynamic Movement Capacity ±35%
• Accelerated Ageing and Weathering (ASTM C792) Excellent
• Application Temperature* +5⁰C to +40⁰C
• Service Temperature -50⁰C to +200⁰C

Bostik V2 Silicone

Product Information

Bostik V2 is an acetic cure, high modulus silicone sealant suitable for general glazing and some specialty glazing purposes. It cures by absorption of atmospheric moisture to for a flexible and durable elastomeric seal.

Your Smart Advantages

• High modulus; acetic cure
• Superior adhesion to broad range of building materials; meets the currently accepted standard for glazing.
• Non-slumping formula
• Long life reliability
• Excellent natural ageing stability – maintains elastomeric properties even under harsh conditions and temperature extremes.

Uses

• Frameless shower screens
• Structural glazing (glass to glass application)
• Fin glazing
• Butt glazing
• General glazing application
• Toughened glass assemblies
• Aquariums
• Fibreglass applications

Specifications

• Colour: Black, Translucent & White
• Tack Free Time: 30 Minutes
• Skin Time: 6 Minutes
• Tooling Time: 8 Minutes
• Slag or Slump: NIl
• Shore A Hardness: 23
• 100% Modulus: 0.45 MPa
• Tensile Strength: 1.90 MPa
• Elongation 500%
• Peel Strength after UV through glass: 62N/25mm
• Dynamic Movement Capacity: ±25%
• Accelerated Ageing and Weathering (ASTM C792): Excellent
• Application Temperature*: +5⁰C to +40⁰C
• Service Temperature: -50⁰C to +190⁰C

Dow Corning DowSil 688 Silicone

Product Information

One-part neutral cure silicone sealant designed for a wide range of glazing, weather sealing and professional caulking applications. It will bond to form a strong weatherproof seal on most common building materials.

Features & Benefits

• Adheres to a wide range of building materials and finishes
• Neutral cure; will not corrode galvanized/zinc-coated steel or attack concrete
• Excellent resistance to weathering, ultra-violet radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents
• Long life reliability
• Meets International Standards such as CNS 8903, BS 5889, BS EN ISO11600 20LM
• Strong elastic seal capable of withstanding movements up to ± 25% of original joint width
• Non-slumping; can be used in vertical and overhead joints
• Easy to use – one part, no mixing required
• Can be applied in any season
• Good weatherability – it is virtually unaffected by sunlight, rain, snow, ozone or temperature extremes
• Easy to use
• Bonds to most common construction materials without use of primer
• Excellent recovery from extension and compression
• Ease of application – ready to use as supplied

Applications

DOWSIL™ 688 Glazing and Cladding Sealant is a one-part neutral cure silicone sealant
designed for a wide range of glazing, weather sealing and professional caulking
applications. It will bond to form a strong weatherproof seal on most common building
materials.

Specifications

• Flow, Sag or Slump Nil
• Approximate Working Time2
• Approximate Working Time2 Minutes 10
• Tack Free Time: 30 Minutes
• Specific Gravity: 1.4
• Durometer Hardness, Shore A: 32
• Ultimate Tensile Strength: 1.1MPa
• Ultimate Elongation at Break: 400%
• Temperature Stability: -20°C to 120°C

Pasco Hypersil 911 Glazing Silicone

Product Information

Pasco Hypersil 911 is a high-performance neutral cure silicone sealant which cures to form a tough and flexible waterproof seal. Formulated for a wide range of glazing, weatherproofing and specialist trade applications.

Key performance Properties

• Features/Benefits
• Neutral cure
• Highly flexible ±25%
• Excellent weathering
• Long term durability
• Will not corrode metals
• Superior adhesion
• Complies with a 5-Green Star rating of VOC’s less 20 grams/litre.
• 100% Silicone
• Easy to tool
• Non-slumping
• Easy to apply
• Low odour
• Available in colours

Uses

• General purpose glazing
• Curtain walls
• Construction joints
• Building claddings
• Perimeter sealing of door and window frames

Provides excellent adhesion to:

• glass
• aluminium
• steel
• concrete
• stainless steel
• ceramic tiles
• painted and powder coated surfaces*
• natural and reconstituted stone*
• most plastics*

Specifications

• Elongation: 400%
• Hardness (Shore A): ASTM D2240: 30
• Joint Movement: ±25%
• Sag/Slump: Non slump (0.1”)
• Tensile Strength KGF/CM2 (MPA): 20 (2.0)
• Cure Method: Neutral
• Specific Gravity: 1.04
• Skin Time @ 20°C & 50% RH: 8-10 min
• Cure Time 10mm @ 25°C: 5-7 Days
• Operating temperature range: -62°C to +170°C

Sealants Australasia Sealproof Silicone

Product Information

SA Sealproof Silicone Sealant is a one-part, low modulus alkoxy silicone sealant for use in most common weatherproofng applications. SA Sealproof is unaffected by normal weathering conditions such as sunlight, ultraviolet radiation, rain, snow and temperature extremes. Its weather-ability enables it to retain its properties after years of exposure. SA Sealproof is compatible with laminated glass, insulating glass units and enables primer less adhesion to acrylic, polycarbonate and many other plastic substrates.

Key performance Properties

• One Part Ready To Use
• Low Modulus
• High Joint Movement +- 50%
• Outstanding Weatherability
• Excellent Primer-Less Adhesion
• Excellent UV Resistance
• 5 Star VOC Compliant

Applications
SA Sealproof is designed for use in glazing applications such as in-shop and fled
glazing of curtain wall modules where glass lights are attached to the metal framing
system with structural sealant. SA Sealproof may also be used to seal assemblies
of metals, masonry, concrete, coated surfaces, plastics, wood and other common
construction materials. SA Sealproof is specially designed for use in butt joints or lap
shear joints in weatherproofng and glazing applications subject to movement. The low-modulus
characteristic reduces strain on the substrate surface and elastomeric quality
allows excellent recovery from extension and compression cycling. SA Sealproof may be
factory or feld applied to glass, metal and plastics in glazing and curtain-wall assemblies
to produce a primary or secondary seal against water, air and dust penetration.

Specifications

• Shore A Hardness: 25
• Ultimate Tensile Strength: 340 psi (2.3 MPa)
• Ultimate Elongation: 715%
• Tensile at 50% Elongation: 41 psi (0.29 MPa)
• Tensile at Max Elongation: 141 psi (0.98 MPa)
• Specific Gravity: 1.40
• Application rate: 2.3 seconds
• Sag/Slump: 2.5 mm max
• Peel Strength Aluminium-Glass (21 day cure) 21°C (70°F) 50% R.H.: 55 ppi (9.6 kN/m)
• Joint Movement Capability: ±50%
• Ozone and U.V. Resistance: Excellent
• Staining on Concrete: None
• Tack Free Time: 2 hours
• Cure Time (9mm deep) at 21°C (70°F) 50% R.H.: 10-14 days
• Tooling Time: 30 minutes
• Application Temperature Range¹: +4 to 49°C
• Performance Range²: -48 to 149°C
• Colours: Black

Sealants Australasia N-60 Glazing Silicone

Product Information

Silicone N-60 is a 100%, extra high bodied, non-slump silicone which has high green strength and an extra fast cure. This makes it the perfect product for Butt Joints, colonial bars and commercial glazing.

Key performance Properties

• Fast Cure
• High Strength
• Architectual Grade
• One Part Ready To Use
• Excellent Adhesion
• Outstanding Weatherability

Applications

Silicone N-60 has excellent adhesion to glass, ceramics, aluminium, masonry,
stone, concrete, most metals and many plastics. Excellent for roof mounted solar
panels, Colonial Bar glazing and Butt glazing.

Specifications

• Cure Method: Neutral (Oxime)
• Colours: Translucent, Black, Aluminium
• Sag/Slump: 3mm Max
• Hardness (Astm D2240): 28 Shore A
• Tensile Strength: 1.9 MPa
• Dynamic Joint Movement: ±25%
• Skin Time @25°C/50% Rh: 2-5 min
• Cure Time 10Mm @25°C/50% Rh: 3-5 Days
• Application Temperature: -6c to 170°
• Specific Gravity: 1.04
• Elongation: 560%

Sealants Australasia N-10 Glazing Silicone

Product Information

SA Silicone N-10 Silicone Sealant is a 1 part 100% oxime, neutral curing adhesive

/ sealant. It is an easy to use silicone designed for general purpose glazing and sealing

applications where long term reliability is required. Weathering and UV resistance

is excellent. It is unaffected by high and low temperatures and its superior physical

properties are retained after many years of exposure.

Key performance Properties

• Non Slump
• One Part Ready To Use
• Outstanding Weatherability
• Excellent Adhesion
• Excellent UV Resistance
• 5 Star VOC Compliant

Applications
SA Silicone N-10 has excellent adhesion to glass, ceramics, aluminium, GRP, granite,
concrete, galvanised steel, and many plastics. It can be used for standard glazing of
frames panels and shop fronts. Sealing environmental and refrigerated rooms, sheet
metal, skylights, ventilators, and air-conditioning units. Assembly of metal / plastic
signs. Weather proofing, and many other general glazing applications.

Specifications

• Cure Method: Neutral (Oxime)
• Colours: Translucent, White, Black, Grey, Dark Grey, Aluminium, Sandstone, Off White, Brown
• Sag/Slump: Non-Slump (0.1%)
• Hardness: (AStM D2240) 28 Shore A
• Tensile Strength: 1.7 MPa
• Dynamic Joint Movement: ±25%
• Skin Time @25°C/50% Rh: 5-10 min
• Cure time 10Mm @25°C/50% Rh: 5-7 Days
• Operating temperature: -62°C to 180°C
• Specifc Gravity: 1.04

Sikaflex®-112 Crystal Clear

Product Information

Transparent adhesive and sealant

Sikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. Internal and external use.

Usage

An adhesive to bond most construction components and materials such as:

• Concrete
• Masonry
• Most stones
• Ceramic
• Wood
• Metals
• Glass
• PVC

A sealant to seal around bonded components.

Specifications

• Transparent
• Good initial grab
• Very low emissions

Bostik 6S Neutral Cure

Product Information

Bostik 6S Neutral Cure is a one component, non–flowing, neutral cure, mid modulus silicone sealant. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant.

• Reduces the growth of mould and mildew
• Will not slump in typical construction joints

Recommended Uses

• Bathrooms,
• Fiberglass Spa Units
• Shower screens
• Ceramic tiles
• Tiles and grout areas. (for Granite, Marble and some porous stones, use / refer to Bostik 5CLM data sheet) Around edges of kitchen bench tops
• Edges of splash backs (*Not to be used on the back of splash backs, refer to Bostik V 60)
• Cool Rooms

Specifications

• Contains an effective fungicide to reduce the growth of mold and mildew.
• Because it is a neutral curing system, it is more pleasant to work with particularly in a confined space
• It also offers excellent adhesion to powder coated metal
• The thixotropic nature of this product ensures that it will not slump in typical construction joints.

Bostik Kitchen and Bathroom Silicone

Product Information

Bostik Kitchen & Bathroom Neutral Cure is a premium, oxime-curing wet area silicone sealant. It is specially formulated to resist mildew when exposed to prolonged hot and humid environments.

Specifications

• Neutral (Oxime) curing
• Resists mould & mildew in hot and humid environments
• Flexible silicone rubber
• Anti fungal (fungicide added)
• Joint movement capabilities ±25%
• Maintains a waterproof flexible joint
• Low odour
• Will not corrode galvanized/zinc coated steel or attack concrete

Pasco 912 Sanitary Silicone

Product Information

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.

300ml / 20 per Box

Specifications

• Neutral cure
• Mould/Mildew resistant
• Highly flexible ±25%
• Excellent weathering
• Long term durability
• Will not corrode metals
• Superior adhesion
• Complies with a 5-Green
• Star rating of VOC’s less than 5% or 50 grams/litre
• Excellent chemical resistance
• 100% Silicone
• Low odour
• Non-slumping
• Easy to apply
• Easy to tool
• Available in colours

Sealants Australasia Sanitary Silicone

Product Information

SA Sanitary Silicone Sealant is a one part, 100% oxime, neutral curing adhesive
/ sealant containing anti-fungicide to prevent mould growth. It resists mildew when
exposed to prolonged hot and humid environments and is suitable for sealing in
kitchens, vanities, bathrooms, shower screens and any other wet area applications.

Applications
SA Sanitary has excellent adhesion to glass, ceramics, aluminium, masonry, stone,
concrete, most metals and many plastics. It may be used for general glazing and
weatherproofing applications including wet areas and humid environments.

Specifications

• Non Slump
• Mildew Resistant
• One Part Ready To Use
• Outstanding Weatherability
• Excellent Adhesion
• Excellent Uv Resistance
• 5 Star Voc Compliant

Bostik 6S Neutral Cure

Product Information

Bostik 6S Neutral Cure is a one component, non–flowing, neutral cure, mid modulus silicone sealant. It cures by absorption of atmospheric moisture to form a flexible and durable elastomeric sealant.

• Reduces the growth of mould and mildew
• Will not slump in typical construction joints

Recommended Uses

• Bathrooms,
• Fiberglass Spa Units
• Shower screens
• Ceramic tiles
• Tiles and grout areas. (for Granite, Marble and some porous stones, use / refer to Bostik 5CLM data sheet) Around edges of kitchen bench tops
• Edges of splash backs (*Not to be used on the back of splash backs, refer to Bostik V 60)
• Cool Rooms

Specifications

• Contains an effective fungicide to reduce the growth of mold and mildew.
• Because it is a neutral curing system, it is more pleasant to work with particularly in a confined space
• It also offers excellent adhesion to powder coated metal
• The thixotropic nature of this product ensures that it will not slump in typical construction joints.

Bostik Kitchen and Bathroom Silicone

Product Information

Bostik Kitchen & Bathroom Neutral Cure is a premium, oxime-curing wet area silicone sealant. It is specially formulated to resist mildew when exposed to prolonged hot and humid environments.

Specifications

• Neutral (Oxime) curing
• Resists mould & mildew in hot and humid environments
• Flexible silicone rubber
• Anti fungal (fungicide added)
• Joint movement capabilities ±25%
• Maintains a waterproof flexible joint
• Low odour
• Will not corrode galvanized/zinc coated steel or attack concrete

Pasco 912 Sanitary Silicone

Product Information

Pasco Hypersil 912 is a high performance neutral cure sanitary grade silicone sealant which cures to form a tough and flexible waterproof seal with the added advantage of resisting the growth of mould and mildew.

300ml / 20 per Box

Specifications

• Neutral cure
• Mould/Mildew resistant
• Highly flexible ±25%
• Excellent weathering
• Long term durability
• Will not corrode metals
• Superior adhesion
• Complies with a 5-Green
• Star rating of VOC’s less than 5% or 50 grams/litre
• Excellent chemical resistance
• 100% Silicone
• Low odour
• Non-slumping
• Easy to apply
• Easy to tool
• Available in colours

Sealants Australasia Sanitary Silicone

Product Information

SA Sanitary Silicone Sealant is a one part, 100% oxime, neutral curing adhesive
/ sealant containing anti-fungicide to prevent mould growth. It resists mildew when
exposed to prolonged hot and humid environments and is suitable for sealing in
kitchens, vanities, bathrooms, shower screens and any other wet area applications.

Applications
SA Sanitary has excellent adhesion to glass, ceramics, aluminium, masonry, stone,
concrete, most metals and many plastics. It may be used for general glazing and
weatherproofing applications including wet areas and humid environments.

Specifications

• Non Slump
• Mildew Resistant
• One Part Ready To Use
• Outstanding Weatherability
• Excellent Adhesion
• Excellent Uv Resistance
• 5 Star Voc Compliant