GRIPSET C1P FEATURES & BENEFITS
- Able to be used for both positive and negative waterproofing
- Waterproof, withstanding continuously wet and immersed environments
- Dries without cracking, low shrinkage
- 1 component, mixed on site with water, ready to use.
- Flexible and good crack bridging properties
- Tested up to 6 bar water pressure (60m head of pressure); positive side; tested to 1.5 bar (15m head of pressure) on negative side.
- Withstands UV light exposure
- Can be applied by brush, roller and trowel on horizontal and vertical surfaces without sagging. Able to spray apply
- Ability to apply over damp concrete
- Potable water approved
- Non-toxic
USES
- Basement walls, internal and external sides
- Lift pits
- Podiums, terraces, general external wet areas
- Water features, swimming pools
- Potable water storage facilities, retention and water tanks
- Waterproofing system over concrete blocks, brick, masonry and mortars where crystal treatments are not suitable
- Waterproofing under tiles and pavers in external areas
- Sandwich sealing between existing and new concrete toppings
- Planters, retaining walls, earth shelters
COVERAGE
- Coverage: 1.25kg/m² per mm layer thickness
- For general waterproofing applications – a minimum 1.5mm dried film thickness is required
- For immersed applications – a minimum 2mm dried film thickness is required
- For preventing ingress of water under pressure – a minimum 2.5mm dried film thickness is required
- Minimum of 2 coats
